metallic silver foil on fabric & textile

small roll:75cm*120m

big roll:150cm*300m

Usage in fabric & leather

Made in china

Ship to worldwide

Description

1.How to print the hot stamping foil on fabric & textile?
Our foils are not hot transfer foil, require glue,high temperature and pressure.
Screen printing and roll to roll printing are both supported.

Details steps:

A.Please make sure the surface of the foil and the textile & leather are clean.
B.Add glue on the textile & leather, put the foil on them(if it is crystal foil, then no need to add glue)
C.Adjust temperature and pressure.Suggested temperatrue will be 90-140 degree.Keep the foil and the textile stay in high temperature and pressure for 2-3 seconds.
D.Wait for the foil and the textile cool down, and then peel the foil away.

2.Do i need to put glue when printing on PU?
There is some glue on the surface of the PU already,so no need to add extra glue when printing.
Just adjusting temperature and pressure is OK.
Well,the result will be betterr if add the glue.

3.Do i need to put the glue when printing on paper?
There is some glue on the back of the paper foil already, so no need to add extra glue when printing,
Just adjusting temperature and pressure is OK.

4.Why is the foil unable to release weel when transferring?
There are various for this.
Please find solutions below:
A.Adjust your temperature.Please increase or decrease your temperature until it works.Increasing is suggested as the first trial.
B.Alternate your glue.Some glue has had compatibility with the foil.

5.Can i print the foil without glue?
Yes,there are two situations that you don’t have to add glue.
A.Print the foil on Pu.
B.Use crystal foil instead of glue.